WBX mounts are WB mounts with a longer reach from the wall. Supporting tube is approximately 25% longer and 25% larger in diameter than the WB Series. Used for larger enclosures needing more rotation for proper coverage. Includes wall bracket, cover plate, clamp, jaw, tube, ball assembly and necessary hardware for clamp and jaw. Swivels left and right from the wall plate. U-shaped tube.

Product Specifications

120 lbs maximum weight capacity
Available in Black
Mounts to bottom or top of enclosure
Mount Arm Length : 18.625"

VAC: 12-111-142

• Bandwidth DC - 200 MHz
• Input Signal Level 0.5 - 2.0Vpp (0V DC offset)
• Input Configuration Standard (75 Ohms)
• Input Coupling DC
• Input & Output Connectors: BNC (2 out)
• Gain Unity
• Output Series Impedance 75 Ohms
• Mounting Two threaded 6-32 inserts
• Power Supply 12V AC
• Power Connector Type BNC
• Power Status Power LED indicator
• Temperature -40øC to 50øC
• Humidity 0% - 95%
• (Includes wall transformer)

The ST Mounts are the most flexible of the Professional OmniMounts and are extraordinary problem solvers. If the enclosure is strong enough, ST mounts can be attached to any surface and provide strong, flexible coverage. ST Mounts may be Ceiling, Wall or Floor mounted and may be mounted to the Top, Side or Bottom of the speaker.

The Omnimount 30STX Flexible Speaker Mount is designed to attach to any side of the speaker enclosure with the other end attached to the ceiling, wall, or floor. These mounts are professional quality
known for durability, easy installation, and appearance.

This patented black ball and clamp mount will hold speakers or other equipment weighing up to 30 lbs (13.6 kg). Longer than the ST Mount, the STX Mount will give speaker enclosures more horizontal and vertical coverage.

Features:
Flexible Mounting
This strong ball and clamp mount can be attached to any side of the speaker enclosure and subsequently to almost any horizontal surface.
Professional Quality
Made of steel, this professional quality mount is superbly designed to be both strong and durable.

STX-60 - Weight Capacity 60 lbs
STX-120 - Weight

The OmniMount 20.5 CA Ceiling Speaker Mount is designed to attach to the back of the speaker enclosure with the other end attached to the ceiling or other horizontal surface. These mounts are professional quality, known for durability, easy installation, and slick appearance.

This black mount will hold speakers or other equipment weighing up to 20.5 lbs (9.3 kg) and gives a full 360 degree range of horizontal coverage. Note:You must purchase an accessory that will attach the mount to the chosen surface.

Features
360 degrees of horizontal coverage as well as 90 degrees of vertical coverage.
Made of steel, this professional quality mount is superbly designed to be both strong and durable.
20-5CA: Mount Arm Length : 8.75" From Ceiling Plate to Center of Speaker Mount Plate. 4.38" From Wall.
30-0CA: Mount Arm Length : 9.25

The flexible gooseneck lamp with versatility and style. These sleek, unobtrusive lamps with their quiet black look compliment any decor. The High Intensity Littlite is ideally suited to any task involving accurate, close or detail work. Utilizing Halogen technology, the High Intensity efficiently produces crisp, bright white light. The light is concentrated in a tightly controlled pattern which is easily aimed exactly where you need it. XLR Type Bases Also Available - Please Call. The L-3 (High Intensity) features a permanently attached gooseneck with a high intensity tungsten halogen bulb in a stylish finned hood. The L-4 (High Intensity) features a detachable gooseneck with a swivel connector at the base and storage clips for the gooseneck. The lamp has a high intensity tungsten halogen bulb in a stylish finned hood.

The flexible gooseneck lamp with versatility and style. Sleek, unobtrusive lamps with quiet black look compliment any decor. The High Intensity, low powered, long lasting Littlite is ideally suited to any task involving accurate, close or detail work. These efficient lamps produce enough light for many tasks in dimly lit areas. With its white, focused LED light source, this Littlite is best suited to applications where a high level of light is unacceptable.
XLR and Right Angle XLR Type Bases also available.

The C-Clamp Adapter provides a specialized solution for affixing OmniMount supported devices to a horizontal tubular structure, such as a truss or theatrical lighting grid.

The all-new Scan Do HD Scan Converter converts Digital DVI and Analog RGB, at resolutions up to 1920 x 1080, to 3G/HD/SD-SDI output, providing broadcast-quality video images. It supports all SMPTE 3G-SDI output resolutions up to 1080p per SMPTE 424M-2006, HD-SDI output resolutions up to 1080i per SMPTE 292 and SD-SDI resolutions (NTSC and PAL) per SMPTE 259, making it the most versatile model in the Scan Do family.

Advanced scaling algorithms and 10 bit processing provide exceptionally clean and accurate broadcast quality output.

The Scan Do HD is fully genlockable to tri-level sync or black burst and provides the broadcast engineer with precision genlock phasing controls.

The all new Scan Do HD is feature rich with Processing Controls that include Brightness, Contrast, Sharpness, Hue, and Saturation, comes equipped with Variable Flic

TecNec Exclusive-1RU Patch panels feature Feedthru Female DB15 VGA High Density Connectors. Excellent for VGA patching requirements. Mounted on 16 gauge rack mount panel. Perfect for all broadcast/network applications.

Simply plug your power adapters into this handy 12in cable, and plug the cable into your powerstrip. You will get full use of the sockets on your powerstrip, plus an extra socket for every cable you use! Powerstrip Saver works perfectly with "top-to-bottom" sockets, too! Just plug your power adapter into the Powerstrip Saver cable and plug the cable into the top socket of your powerstrip!

Rackmunt holds two Scan Do model 1291 or 1292.

ProductionBlox are general purpose animated backgrounds with matching left, right and lower thirds. Each volume includes 35 Blox. Each Blox contains a full screen, seamlessly looping animated background and matching left, right and lower third elements. Each third element is provided in 4 variations (clean, blurred, drop shadow, transparency gradient) and 5 Custom Mattes. All volumes are Royalty Free and supplied on a DVD-ROM in QuickTime Format in both NTSC and PAL.

Technical Specifications

All of the video elements in this Unit conform to industry standards for resolution, pixel aspect ratio, luma and chroma values as set forth by the ATSC.
All animated elements are supplied in QuickTime 6 format. The video clips are losslessly compressed using maximum quality PNG compression.
HD material is provided in 1920 x1080, 24p.

ProductionBlox are general purpose animated backgrounds with matching left, right and lower thirds. Each volume includes 35 Blox. Each Blox contains a full screen, seamlessly looping animated background and matching left, right and lower third elements. Each third element is provided in 4 variations (clean, blurred, drop shadow, transparency gradient) and 5 Custom Mattes. All volumes are Royalty Free and supplied on a DVD-ROM in QuickTime Format in both NTSC and PAL.

Technical Specifications

All of the video elements in this Unit conform to industry standards for resolution, pixel aspect ratio, luma and chroma values as set forth by ITU-R BT.601 (720 x 486 30p for NTSC D1 and 720 x 576 25p for PAL D1).
All animated elements are supplied in QuickTime 6 format. The video clips are losslessly compressed using maximum quality PNG comp